Scalloped Circle Hoop Cutter

Regular price $4.99
/

Only 991 items in stock!

Made out of PLA filament. Each cutter has a 0.4 mm cutting edge.

This cutter is approximately 37 x 30mm.

Cutters may have slight imperfections that will not affect their performance. Cutters may vary slightly due to the nature of 3D printing/what base is necessary for different types of shapes. Color of the cutters may also vary.

The cutters with embossers are best used on clay closer to 3mm thick. The walls of the cutters are 14mm and embossers are 12mm. If your clay isn’t at least 2mm thick, the embossing will not show up, the thicker your clay is, the more defined the embossing will be. If you have any questions at all about if these will work for you or not, please don’t hesitate to reach out!

Cutter processing times are always updated in my Shop Policies page here on my website. It typically ranges from 3-10 business days depending on the volume of orders I receive.

CARE INSTRUCTIONS

Please be gentle with your cutters. They are made from PLA filament and it is normal to have some imperfections.

Please wash them with warm, soapy water. They are not dishwasher safe.

To use, press the cutter into the polymer clay, making sure you go completely through the clay slab. I gently wiggle the cutter, and slowly lift the cutter out of the clay. Edges of the clay can be smoothed with your finger or can be sanded down once you have cured the clay. For best results, I highly recommend working on a glossy surface like a tile or glass.

For cutters with small details, working on a tile or glass is very important so that your clay sticks to the surface and not to the cutter. You can also dip your cutter in corn starch before cutting to help prevent clay from sticking to the cutter.

If you have any questions or need any tips, please don't hesitate to reach out to me!


Recently viewed